Digital Thermometer

Usage
1、Before using the thermometer, the head of the thermometer should be disinfected with alcohol.
2、Press the switch, the buzzer immediately emits a beeping sound, the display as shown in Figure A, the time is about 2 seconds.
3. Then the display shows the temperature of the last side volume as shown in Figure B (if the last measurement was 36.5℃) and lasts for about 2 seconds. Then the display may show as shown in Figure C. The “℃” symbol flashes, indicating that the thermometer has been in the side state. (So when the room temperature is higher than 32 ℃, the thermometer will show the room temperature and not show as shown in Figure D, while the “℃” symbol constantly flashing)
4. The thermometer will be used to measure the body temperature. The temperature value displayed when measuring the body temperature rises gradually, while the “℃” symbol keeps flashing.
5. When the rate of temperature rise in 16 seconds is less than 0, 1 ℃, the “℃” symbol stops flashing, while the thermometer beeps for about 5 seconds, when the thermometer measurement is complete, you can read the displayed body temperature value.
6. The thermometer has an automatic shutdown function, will automatically shut down within 10 minutes after the end of the measurement. But in order to extend the battery life, it is recommended that users press the power button to turn off the power after the measurement.